Linksys AE2500 is a utility that helps users prepare their USB adapters for use. After logging in to the application, it will display an introduction to the program and briefly describe its use.
Although it is focused on the Linksys AE2500 Wireless adapter, the utility is applicable to any USB adapter supported by the program. Since Cisco offers many different models, all available adapter type, from USB2 to USB3.0, can be supported by the program.
Only on the Linksys AE2500 adapter type is the detection mechanism of the utility not in place. The support for any other model will be provided at a later time.
In addition to the Linksys AE2500 hardware support, a good number of other IEEE 802.11n-related modules have been provided by the application as well. Among them are the Linksys Wireless range extender, the Wireless Link 7200 series, WPA and WPA2 Enterprise adapters, plus other 802.11n Wireless adapters.
Linksys AE2500 License:
Linksys and the Linksys logo are registered trademarks of Cisco Systems, Inc. in the United States and certain other countries. Cisco does not warrant that uses of the Linksys name or marks comply with its trademark license.
Linksys AE2500 Extras:
With Linksys AE2500 there are a lot of extra feature available. The list of extras is as follows:
*Linksys AE2500 – WY100 : Software You Use – Linksys gives you the option to deploy their software on your device. This way you can customize the experience in your environment. This option allows you to access Linksys Control Center and download other available Linksys applications that you might have missed.
*Linksys AE2500 – WY100 : Flash Memory Diagnostic Tool (FMT):
When a Computer starts up, it has to initialize system devices like Ethernet cards, and solid state drives.
If there are errors with these devices, it can cause a lot of frustration.
The LinkSys Flash Memory Diagnostic Tool gives you the ability to determine what is wrong and lets you do the necessary repair!
Linksys AE2500 System Requirements:
Before Linksys AE2500 can be used, it is recommended to have updated an operating system and also have sufficient amount of resources available on your computer.
It will typically take a few minutes for the program to detect and configure the Linksys AE2500.
Once configured, you will be able to access the wireless hotspot, which is accessible from any device connected
There are several sections in the program, which depend on your requirements. The first one is Setup, which requires you to enter the information related to the wireless network configuration. The second is Advanced, which allows you to configure the advanced features of the adapter.
Last but not least, Diagnostics, which provides you with the information regarding the current status of the adapter.
Linksys AE2500 latest version:
An updated version of the software is released every year to keep up with the changes in the software related to wireless, including the changing use of 802.11a, 802.11b, 802.11g standards.
Linksys AE2500 License:
Linksys AE2500 is freeware. Unofficial version is released as an EXE installer package, which can be downloaded from the official site. User has the right to use the program as long as it does not modify the original file.
Download Linksys AE2500
Microsoft’s latest offering for casual users – Windows Live OneCare Free – is designed to offer basic security and protection against malware, viruses and similar threats to users’ computers.
That’s the general idea, anyway. However, it turns out that for some users the program offers little more than a place to install adware and spyware on their PCs. The most extreme example of this occurrence happened this week when Microsoft offered their customers the chance to download and install the software free of charge.
Users who accepted the offer have been suffering from adware and spyware in their PCs for the past few days, suggesting that users are being urged to install the program on multiple computers.
Since the program is a bit controversial because of its content, we decided to perform a quick survey of what users thought of the software.
Have you run the free Windows Live OneCare Free? Do you think its safe to download and install?
If you’ve experienced any problems while installing the program, let us know in the comments section below.
The New 1/2-N Processor Platform SliTaz™ packs 2X better performance than the
1/2-N platform and offers enhanced security and system stability for a
virtually silent and cool computing experience, allowing you to enjoy your
HD media in true high definition.
Enjoy your digital photos, videos and music in true digital clarity. Each sliTaz Mini™ enables
you to access up to 128GB of multimedia content from an external hard drive via USB 3.0 while playing
Linksys AE2500 is a convenient piece of software for Linksys device owners. It is the first one in the field of Internet devices and wireless-network certification programs to support Linksys USB adapters.
When an owner encounters a problem with a USB adapter model and does not use the provided software, they have the option of going out and buying a similar USB wireless adapter at the local market.
Linksys AE2500 is available for download from several online sources, most of them being free of cost, however, many sellers offer the software in its pro version for an affordable fee.
So what is Linksys AE2500?
Linksys AE2500 is an application that is prepared and ready to provide support to users who have lost their USB device. The software is specially developed for Windows and its purpose is to allow you to securely connect and configure a wireless LAN adapter with a client’s Windows OS.
Once the user has downloaded the program and activated it, the wizard starts and you will be asked to connect the USB wireless device of your choice.
In the following short tutorial, you will learn how to connect and configure a Linksys AE2500 with Windows.
Prerequisites for Linksys AE2500 installation:
Download the Linksys AE2500 from the given link on the page. Double-click the downloaded file to open and then run the given installation file.
Click the Finish button.
The Linksys AE2500 utility has started to install on your PC.
If you want Linksys AE2500 to appear in your start menu, and in the system tray, then click the Finish button.
Once the installation process is finished, Linksys AE2500 will start automatically. Open it and you will see a page that lists various views of the computer. By clicking on one of them, you will reach a setup wizard that will get you through all the steps required to detect and set up your wireless network adapter.
When the entire process is completed, you will be instructed to restart your computer.
Linksys AE2500 Configure your Network settings:
When the computer restarts, Linksys AE2500 will open by default. By default, the program connects to the internet, however, if you prefer, you can choose to select one of the predefined networks in your area.
This way, you can configure the wireless network and save the credentials in the system without having to connect to the internet again.
Enter the name and location of your network.
Linksys AE2500 is a nifty little program developed by Cisco in an attempt to support users throughout the configuration process of a Linksys AE2500 wireless adapter.
It is not the first utility of this type developed by Cisco. A much larger project targeting owners of USB adapters issued by the company has been employed with the purpose of providing assistance to users that have trouble figuring out the installation of such a device.
For each adapter model, a separate utility was developed, therefore using Linksys AE2500 on a device other than the one supported is not possible. The built-in detection engine of the program simply does not allow it.
Typically, when you purchase this type of hardware, you are also provided with an installation CD, where software like Linksys AE2500 is included. However, the package also comes in downloadable form if you misplaced the disc, for instance.
The utility is easy to install and use and embeds a step by step wizard that carries you through all the stages of setting up and configuring a wireless adapter.
First and foremost, you are required to connect the USB to your computer, then to launch the application and allow it to take its time for the detection. Once the adapter has been successfully recognized, you can move on to the next step and follow the on-screen instructions up to the point where the adapter is configured correctly.
In conclusion, Linksys AE2500 is a good asset that any owner of a Cisco wireless device should have in their software collection. With its aid, configuring an adapter is much easier and requires fewer efforts.
How to use Linksys AE2500 with Linksys Router? Before doing anything with wireless network hardware, you must examine the router interface first. A working knowledge of the device’s setup is necessary when you want to use Linksys AE2500 and Linksys Router to set up network connections.
However, if you don’t like navigating through the device’s interface and want a quick, easy and simple way to assign an SSID, that’s when these applications are handy.
If you are on a time constraint and just want to know how to use Linksys AE2500 and Linksys Router, then there’s a solution. A set of guides can help you in understanding how to use Linksys AE2500 and Linksys Router connection.
How to Use Linksys AE2500 to Setup Wireless Network
Steps to Setup Wireless Connection
Connect the Linksys Router to any free USB port on your
OS: Windows 7
Processor: Intel Core2 Duo E8400
Hard Drive: 80GB
Video Card: NVIDIA GeForce GTX 460 1GB with 1GB RAM
Graphics: DirectX 9.0c compatible
DVD-ROM Drive: Required
Network: Broadband Internet connection
Update: I have updated the interface for both the Windows and Mac installers. Make sure you download the new installer. If you still use the version found in previous releases, it